Kenton Pro CV to MIDI - 1x CV to MIDI Converter (Plus 2x Aux)

The Pro CV to MIDI is the opposite of the Pro Solo, converting analogue CV and Gate signals into monophonic MIDI data. Thanks to its highly accurate CV tracking, it can transmit MIDI notes alongside pitch bend information, faithfully capturing the full resolution of the incoming analogue signal rather than limiting it to semitone increments.

In addition to pitch and gate conversion, the unit includes two assignable auxiliary inputs that can be configured to generate MIDI CC messages, aftertouch, note velocity and more. It can also create a MIDI clock from incoming clock signals, making it a versatile interface for integrating analogue and MIDI equipment.

The Pro CV to MIDI supports 1V/Oct, Hz/Volt and 1.2V/Oct pitch standards, as well as both gate and S-trigger formats. An intelligent Learn Mode simplifies setup: play a guided sequence of notes and the unit automatically determines the correct CV scaling and gate configuration for your equipment.

Please note that all cables are sold separately, as connection requirements vary depending on the devices being used.

• Designed to work with all types of CV input
• Super-fast response time
• Famous Kenton build quality
• High specification 16-bit A-to-D converter and reference for main CV input for rock-steady pitches
• One CV and one Gate input
• CV/Gate/Aux inputs on 3.5mm mono jack sockets (3.5mm to 1/4″ cables are available in our cables section)
• MIDI OUT socket (5 pin DIN)
• Any MIDI channel can be selected for output
• Switchable for V/oct & Hz/V & 1.2V/oct scaling systems
• Gate mode selectable V-trig or S-trig
• Auto tune feature makes tuning really easy
• Fine tune & scale are adjustable using front panel buttons
• Transpose (coarse tune) – up & down 12 semitones
• Adjustable pitchbend range – maximum 48 semitones up and down
• Two aux inputs can convert other voltages to many other MIDI messages
• Can convert clock to MIDI
• 9V multi-region, switch mode power supply is included. It has 4 interchangeable heads suitable for most parts of the world, including the UK, Europe, the USA, Canada, Japan, Australia & New Zealand