We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Kenton Pro-DCB mk3
Our product SKU
5919
£209.00
BACK-ORDER
Demo in Store
Try it out – call ahead to check availability
SEEN IT CHEAPER?
We match Authorised UK dealers
PART EXCHANGE
Part-Exchange your DJ equipment
Product Information
MIDI To DCB Converter
The Kenton Pro-DCB brings instant MIDI to those much-loved instruments, the Juno-60 and Jupiter-8*. Just plug in and go.
As well as offering control of notes (and program change on Jupiter-8), the interface also has output sockets for filter control and arpeggio clocking. In addition, it boasts a built-in programmable LFO and works both ways (ie. it's bi-directional), so your Juno can be used as a master keyboard if required. We think that you'll find this the most comprehensive MIDI-DCB converter available today, and it's fast too.
Please ensure that you purchase the adaptor lead if you have a Jupiter-8 with a 20 pin OP-8 connector.
Juno-60 always has a 14 pin DCB connector - so the included DCB lead is fine.
Juno-6 fitted with Kenton DCB socket upgrade also has 14 pin DCB connector - the included DCB lead is fine.
*Jupiter-8 must have an existing DCB (14 pin) or OP-8 (20 pin) connector - however some Jupiter-8s have neither - you need to check which yours has. If you have the 14 pin DCB connector, the included DCB lead is fine. If you have the 20 pin OP-8 connector you will need the 14 pin to 20 pin adaptor lead also.
Two 3.5mm mono jack to 1/4” mono jack leads for Clock and VCF are included as well as the 14 pin DCB lead.
As well as offering control of notes (and program change on Jupiter-8), the interface also has output sockets for filter control and arpeggio clocking. In addition, it boasts a built-in programmable LFO and works both ways (ie. it's bi-directional), so your Juno can be used as a master keyboard if required. We think that you'll find this the most comprehensive MIDI-DCB converter available today, and it's fast too.
Please ensure that you purchase the adaptor lead if you have a Jupiter-8 with a 20 pin OP-8 connector.
Juno-60 always has a 14 pin DCB connector - so the included DCB lead is fine.
Juno-6 fitted with Kenton DCB socket upgrade also has 14 pin DCB connector - the included DCB lead is fine.
*Jupiter-8 must have an existing DCB (14 pin) or OP-8 (20 pin) connector - however some Jupiter-8s have neither - you need to check which yours has. If you have the 14 pin DCB connector, the included DCB lead is fine. If you have the 20 pin OP-8 connector you will need the 14 pin to 20 pin adaptor lead also.
Two 3.5mm mono jack to 1/4” mono jack leads for Clock and VCF are included as well as the 14 pin DCB lead.
Additional Information
SKU
5919
Warranty
Full Manufacturer's Warranty