Laserworld EL-200RGB MK2

3-Head RGB laser with plug & play operation and DMX control projecting in-air beams, waves and tunnel effects. Perfect for creating a fun Laser show at home parties, small bars, and mobile DJ events.

The red diode laser module with 70 mW / 638 nm, the green DPSS laser module with 25 mW / 532 nm and the royal-blue laser module with 60 mW / 450 nm ensure beautiful colours and brightness. The beams have good specifications with ca. 3 mm / 2 mrad and the projector offers high-speed step motors with up to 2-5 kpps as well as a scan angle of up to 30°. About ca. 50 (layers, tunnels, fences, waves, etc.) basic effects can be controlled via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated microphone can be adjusted. There is an interlock connector for safety switch as well as a key switch at the rear side of this very compact device.The triple laser aperture provides extra intense red, green and blue beam effects.

The Laserworld EL-200RGB MK2 is a good solution for first-time users and mobile use and it is often used in bars, small clubs, at private parties or for home use.

Total Power: 200mW

Guaranteed Power155 mW

Power Red: 70 mW / 638 nm

Power Green: 25 mW / 532 nm

Power Blue: 60 mW / 450 nm

Beam Specifications: ca. 3 mm / 2 mrad

Scanner: high-speed step motors with up to 2-5 kpps

Max. Scan Angle: 30°

Laser Source: Diode, DPSS Laser

Laser Class: 3B

Operation Modes: Stand-Alone, Sound-to-Light, DMX

Basic Patterns: ca. 50 (layers, tunnels, fences, waves, etc.)

Accessories: power cable, manual, interlock, key

Power Supply: 85V - 250 V AC

Power Consumption:60 W

Dimensions: 175 x 395 x 85 mm

Weight: 3.9 kg