ADAM Audio A7V White (Pair)

Celebrating 25 years of industry leading monitoring solution research and development, ADAM Audio have released the limited edition A7V White! Available as a pair. The A7V White speakers offer a luxurious arctic white finish, perfect for studios or home audio setups where traditional black doesn't fit. They share all of the features of the original counterparts, including Sonarworks integration for automated room correction. The A7V White studio monitors feature 7-inch woofers made from Multi-Layer Mineral fibers and ADAM Audio's precision X-ART tweeters, offering a wide frequency response from 40 Hz to 45 kHz. With rotatable HPS waveguide technology and built-in DSP-based tuning options, you can customise the sound of the A7V White speakers to suit your room and preferences.

Check out the video below for more information on the ADAM Audio A Series Limited Edition White studio monitors:

• Limited edition Arctic White finish
• Sonarworks room correction integration
• Tailored for the small studio
• 7-inch woofer and X-ART tweeter
• 40 Hz to 45 kHz frequency response
• ADAM Audio HPS waveguide technology
• Hybrid amplification
• DSP-based electronics
• Room adaptation
• Pre-defined "Voicing" sound profiles

ADAM Audio HPS (high-frequency propagation system) waveguide technology enables tweeters to disperse sound with controlled consistency, broad in the horizontal axis but tightly focused in the vertical plane. The A Series introduces a rotatable HPS waveguide design. You can shift A Series tweeters in 90-degree steps to continue to benefit from HPS waveguide technology whether you position the speakers horizontally or vertically.

The A Series HPS Waveguide is made from a new glass fibre polymer compound that helps create a clear sound, free of unwanted resonance. The ADAM Audio X-ART tweeter is at the heart of the rotatable HPS waveguide. Handmade in Germany, the X-ART tweeter provides a precise transient response and reproduces the finest sonic details. This X-ART tweeter is used in every A Series speaker, providing a detailed, consistent sound across the product line.

A Series woofers are constructed with a unique blend of mineral stone fibres that have been baked together to create a lightweight but highly stable material. The mineral composition, layering and geometry of each cone is specific to the driver used in each model. By combining this material with a new magnet system, A Series woofers produce high output with low distortion, delivering a clean low-end.

The A Series combines the best of both digital and analogue worlds. The woofers are driven by Class D amplifiers that help produce linear performance while reducing distortion. These amplifiers were chosen specifically for their power and efficiency, in terms of both energy consumption and sound reproduction. Low thermal dissipation allows for a smaller heat sink, which facilitated additional investment in the exceptional power and performance of the A Series.

Tweeters and midrange drivers are powered by Class AB amplifiers which offer a smooth, natural reproduction of high frequencies. Each amplifier is optimised for its working range, resulting in a fine-tuned, properly aligned speaker. To reach this point, ADAM Audio carried out extensive measurements and listening sessions, trialling countless amplifiers and amplifier components.

The A Series capitalises on the transformative power of DSP-based electronics to provide greater tuning precision and better predictability than analogue-only speakers. With firmware that can be updated through an Ethernet connection, over time you can expect to integrate the latest DSP-based capabilities from ADAM Audio—including new filter types and features, plus alternative voicings.

On the back panel of A Series speakers, you will find four bands of room adaptation equalisation: Bass, Desk, Presence and Treble. Each band is adjustable in predefined steps, offering more than 100 tuning options to help compensate for the typical acoustic problems that arise from speaker placement.

A “Voicing” is a pre-defined sound profile of the A Series monitors. On the back panel, you will find two different selections, “UNR” and “Pure”. Here you will also find the “Ext” option which is dedicated to the extended functionality that comes with A Control via the Ethernet connection.

“UNR” or “Uniform Natural Response™” is a dynamic, natural-sounding response curve of ADAM Audio’s own design, which stems from a variety of iconic ADAM Audio legacy products, including the preceding AX Series. It lends itself to production, composition and song writing as its engaging and present sound can give you more room for creativity and flow. It is also a great option whenever you want to use your speakers simply to enjoy some good music.

“Pure” is a highly accurate and neutral sounding option. This is the “flat” setting, ideal for mixing and mastering, where you really must be aware of all the details and rely on an honest representation from your speakers.

The “Ext” option is dedicated to the extended functionality that comes with A Control via the Ethernet connection. Using A Control’s six-band EQ, a custom voicing and be created and pushed to the monitor.

A Series speakers are designed to be adaptable to changing requirements, preferences, and environments. Using the A Control software, you can push advanced filters directly to an embedded platform onboard the monitors to help compensate for imperfect room acoustics. This embedded platform supports filters from industry leading third-party Sonarworks. Using Sonarworks software and a measurement mic, you can calibrate your speakers for a new room or shifting taste.

Check out this video below which demonstrates how you can use the A Control software for room correction!

The new A Series cabinets build on the heritage of ADAM Audio and the AX Series in particular. In an evolutionary design, A Series cabinets have deeper bevelling to further reduce diffraction. In addition, thicker baffle walls strengthen the cabinets and reduce internal vibrations, while a flared-port design optimises airflow and reduces port noise. All A Series speakers include an underside mounting interface, giving you the flexibility to mount them wherever you need them.

• Tweeter: Rotatable X- ART Tweeter + HPS Waveguide
• Woofer: 1x 7" MLM woofer
• Woofer Voice Coil Ø: 33 mm / 1.3”
• Frequency response @ -6dB: 40 Hz - 45 kHz
• Max. peak SPL per speaker at 1 m: 105 dB SPL
• AD convertor: 24-bit
• Internal sample rate: 96 kHz
• Amplifier power RMS: 110 W (Woofer) + 20 W (Tweeter)
• Crossover frequency: 2.8 kHz
• Power rating: 300 W max
• Analogue Inputs (balanced): 1x XLR
• Analogue Inputs (unbalanced): 1x RCA
• Net Weight: 8.7 kg / 19 lb 3 oz
• Gross Weight: 10.7 kg / 23 lb 9 oz
• Cabinet Height x Width x Depth: 337 mm x 200 mm x 280 mm [13 1/4" x 7 7/8" x 11"]
• Box Dimensions: 470 mm x 330 mm x 415 mm [18 1/2“ x 13“ x 16 3/8“]
• AC Input Voltage: 100 - 240V, 50/60 Hz