We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Laserworld CS-12.000RGB FX MK2
Our product SKU
8706
£1,649.00
2-3 DAY DELIVERY
Call us for an estimated shipping date
Demo in Store
Try it out – call ahead to check availability
SEEN IT CHEAPER?
We match Authorised UK dealers
PART EXCHANGE
Part-Exchange your DJ equipment
Product Information
Laserworld CS-12.000RGB FX MK2
The Laserworld CS-12.000RGB FX MK2 is a semi-professional pure diode laser, capable of intense standard laser effects like beams, waves and tunnels but also basic graphics all of which can combine with the 3 built in grating effects to become a real room filler.
Together with the ca. 130 (layers, tunnels, fences, waves, etc.), effects gratings stored on the laser, these effects offer a variety of combinations for impressive illumination of medium-sized to large locations. The grating effects make the projected patterns appear as if they were displayed by many projectors at the same time, allowing for effects that could not be achieved in any other way.
The Laserworld CS-12.000RGB FX MK2 is a pure diode, analogue modulated, full colour RGB laser system with a total output power of up to 11'000 mW and a guaranteed output power of . The red laser source has an output power of 2'600 mW / 638 nm, the green of 2'900 mW / 520 nm and the royal-blue laser source has an output power of 5'500 mW / 450 nm. The diode laser sources ensure powerful laser beams. The projector has good beam specifications with a beam diameter of 5 mm and beam divergence of 1.2 mrad. The galvo system has a scan speed of up to 28kpps @ 8° ILDA, galvo system, switchable effects grating wheel.
Pattern size can be set by two rotary buttons on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display.
There is no airflow in the optical compartment, the temperature is regulated through the separate cooling fins compartment. This reduces maintenance and cleaning requirements to a minimum.
Through DMX, in the stand-alone mode as well as in the sound-to-light mode about ca. 130 (layers, tunnels, fences, waves, etc.), effects gratings can be projected in different colours and in various speed. If the stand-alone mode is active, the pre-programmed patterns run without assistance and in the sound-to-light mode, the laser system projects according to the sound.
Next to the modes mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX cable to a main projector (master projector) project the same patterns like the master projector.
The Laserworld CS-12.000RGB FX MK2 is computer controllable through a professional ILDA interface. Own or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software (e.g. Showeditor or Showcontroller).
There are safety features like a key switch, an interlock and an on-off switch.
The Laserworld CS-12.000RGB FX MK2 show laser projector comes with a compact housing, which is light weight and has a stable bracket. The 360° mounting bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.
The Laserworld CS-12.000RGB FX MK2 is ideal for semi-professional applications and is perfectly suitable in medium sized to large clubs and discos as well as for mobile DJs, private use and in any other party location.
Together with the ca. 130 (layers, tunnels, fences, waves, etc.), effects gratings stored on the laser, these effects offer a variety of combinations for impressive illumination of medium-sized to large locations. The grating effects make the projected patterns appear as if they were displayed by many projectors at the same time, allowing for effects that could not be achieved in any other way.
The Laserworld CS-12.000RGB FX MK2 is a pure diode, analogue modulated, full colour RGB laser system with a total output power of up to 11'000 mW and a guaranteed output power of . The red laser source has an output power of 2'600 mW / 638 nm, the green of 2'900 mW / 520 nm and the royal-blue laser source has an output power of 5'500 mW / 450 nm. The diode laser sources ensure powerful laser beams. The projector has good beam specifications with a beam diameter of 5 mm and beam divergence of 1.2 mrad. The galvo system has a scan speed of up to 28kpps @ 8° ILDA, galvo system, switchable effects grating wheel.
Pattern size can be set by two rotary buttons on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display.
There is no airflow in the optical compartment, the temperature is regulated through the separate cooling fins compartment. This reduces maintenance and cleaning requirements to a minimum.
Through DMX, in the stand-alone mode as well as in the sound-to-light mode about ca. 130 (layers, tunnels, fences, waves, etc.), effects gratings can be projected in different colours and in various speed. If the stand-alone mode is active, the pre-programmed patterns run without assistance and in the sound-to-light mode, the laser system projects according to the sound.
Next to the modes mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX cable to a main projector (master projector) project the same patterns like the master projector.
The Laserworld CS-12.000RGB FX MK2 is computer controllable through a professional ILDA interface. Own or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software (e.g. Showeditor or Showcontroller).
There are safety features like a key switch, an interlock and an on-off switch.
The Laserworld CS-12.000RGB FX MK2 show laser projector comes with a compact housing, which is light weight and has a stable bracket. The 360° mounting bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.
The Laserworld CS-12.000RGB FX MK2 is ideal for semi-professional applications and is perfectly suitable in medium sized to large clubs and discos as well as for mobile DJs, private use and in any other party location.
Key Features
- 11 W pure diode RGB laser system
- Three additional grating effects: Line, Radial and Burst
- DMX controllable, master-slave operation possible
- Full diode laser system
- Computer controllable via ILDA
- Plug & play: Sound-to-light and stand-alone modes
- Capable of basic graphics - 28kpps @ 8° ILDA, galvo system, switchable effects grating wheel scanners
- Full colour with analogue modulation
- Front panel laser beam masking plate
- 360° mounting bracket
Specifications
- Total Power: 11'000 mW
- Power Red: 2'600 mW / 638 nm
- Power Green: 2'900 mW / 520 nm
- Power Blue: 5'500 mW / 450 nm
- Beam Specifications: 5 mm / 1.2 mrad
- Scanner: 28kpps @ 8° ILDA, galvo system, switchable effects grating wheel
- Laser Source: Diode
- Laser Class: 4
- Operation Modes: Stand-alone, sound-to-light, DMX, ILDA, master-slave, Grating
- Basic Patterns: ca. 130 (layers, tunnels, fences, waves, etc.), effects gratings
- Accessories: Power cable, manual, interlock, key
- IP rating: IP4X
- Power Supply: 85V - 250 V AC
- Power Consumption: 200 W
- Dimensions: 285 x 180 x 190 mm
- Weight: 7.7 kg
Overview Video
Additional Information
SKU
8706
Lighting Effect Type
Semi-Professional Pure Diode RGB Laser System
Power
11'000 mW
Colours
RGB
DMX Control
Yes
Remote Control
N/A
Warranty
Full Manufacturer's Warranty