Laserworld PL-30.000RGB MK3

The Laserworld PL-30.000RGB MK3 high power full-colour show laser light is completely equipped with diodes and has a good white balance, with linear colour fading behaviour and high visibility.

The Laserworld PL-30.000RGB MK3 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX or automatic mode.

The Laserworld PL-30.000RGB MK3 comes with integrated ShowNET network interface and free laser show software. Details in the box below.

The Laserworld PL-30.000RGB MK3 has a beam diameter of about ca. 6.5 mm and beam divergence of ca. 1.0 mrad.

Guaranteed output power at aperture is 30'000 mW. 9'000 mW / 638 nm (red), 12'000 mW / 520 nm (green), 12'000 mW / 450 nm (blue).

Fast scanners work at a speed of 40kpps @ 8° ILDA and can do a max. scan angle of 50°.

The complete projector is built with Sealed Housing Technology and is cooled through the external cooling fins (bottom part), keeping the maintenance effort very low.

The show laser has an internal PSU for easy handling.

At the back of the unit there are trim pots for colour settings, so the colour balance can be quickly adjusted. The X- / Y-axis can also be mirrored through switches. Additionally the scan safety can be set at the backside of the laser system.

• 30'000 mW guaranteed power
• Graphics capable - 40kpps @ 8° ILDA
• Max scan angle 50°
• Full colour mixing - analog modulation
• Sharp intense beams – ca. 6.5 mm beam diameter and low divergence of 1.0 mrad
• IP54 waterproof housing
• Save safety settings direct to the laser and they apply in all modes
• Link multiple units with linking Power, DMX and ILDA
• Free computer control software – Showeditor - upgradable to Showcontroller
• Multiple control modes - Auto, DMX, Artnet and ILDA
• Incl. waterproof flightcase

The Laserworld PL-30.000RGB MK3 features an integrated ShowNET network interface with free laser control software included!

Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new Laserworld PL-30.000RGB MK3 for free. The Showcontroller software is supported as well and can be purchased additionally.

The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!

There are two different DMX modes:

• DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
• Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.

The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming

• Guaranteed Power at aperture: 30'000 mW
• Power Red: 9'000 mW / 638 nm
• Power Green: 12'000 mW / 520 nm
• Power Blue: 12'000 mW / 450 nm
• Beam Specifications: ca. 6.5 mm / 1.0 mrad
• Scanner: 40kpps @ 8° ILDA
• Max. Scan Angle: 50°
• Laser Source: Diode
• Laser Class: 4
• Operation Modes: ILDA, DMX, LAN, ArtNet, ILDA streaming, integrated SD card, stand-alone, master-slave
• Basic Patterns: Over 120 (layers, tunnels, fences, waves, etc.)
• Accessories: Incl. waterproof flightcase, key, power cable, manual; full version Showeditor software license included
• IP rating: IP54
• Power Supply: 85 V - 250 V / AC, 50/60 Hz
• Power Consumption: 900 W
• Dimensions: 495 x 341 x 220 mm (L x W x H)
• Weight: 31 kg