We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Laserworld Tarm 6
Our product SKU
8733
£6,419.00
2-3 DAY DELIVERY
Call us for an estimated shipping date
Demo in Store
Try it out – call ahead to check availability
SEEN IT CHEAPER?
We match Authorised UK dealers
PART EXCHANGE
Part-Exchange your DJ equipment
Product Information
Laserworld Tarm 6
The tarm 6 show laser projector is a pure diode solution with analogue colour modulation and a guaranteed output power of 6'000 mW.
The tarm 6 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic mode.
The tarm 6 comes with integrated ShowNET network interface and free laser show software. Details in the box below.
The tarm 6 has good specifications with a beam diameter of ca. 4.5 mm and a beam divergence of less than <0.6 mrad.
It is equipped with a red (2'000 mW / 637 nm), a green (2'000 mW / 520 nm), and a blue (2'500 mW / 450 nm) diode laser source.
The tarm 6 devices have very fast scanners, running at 45kpps @ 8° ILDA and scanning a maximum scan angle of 50°, upgrades to CT-6210 scanners with 60 kpps@8° ILDA and a deflection angle of up to 60° are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.
The housing of the tarm 6 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum. The mounting bracket allows for hanging and for upright mounting of the laser system.
The tarm 6 is suitable for demanding show laser applications and graphics projections in clubs, bars and on small stages and can be used by beginners as well as professionals.
The tarm 6 units have a built-in network DAC for Showcontroller and Showeditor, but also can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX, automatic mode.
The tarm 6 comes with integrated ShowNET network interface and free laser show software. Details in the box below.
The tarm 6 has good specifications with a beam diameter of ca. 4.5 mm and a beam divergence of less than <0.6 mrad.
It is equipped with a red (2'000 mW / 637 nm), a green (2'000 mW / 520 nm), and a blue (2'500 mW / 450 nm) diode laser source.
The tarm 6 devices have very fast scanners, running at 45kpps @ 8° ILDA and scanning a maximum scan angle of 50°, upgrades to CT-6210 scanners with 60 kpps@8° ILDA and a deflection angle of up to 60° are available on request. These specifications definitely make the units perfectly suitable for professional applications and ideal for graphics projections.
The housing of the tarm 6 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum. The mounting bracket allows for hanging and for upright mounting of the laser system.
The tarm 6 is suitable for demanding show laser applications and graphics projections in clubs, bars and on small stages and can be used by beginners as well as professionals.
Key Features
- 6 W guaranteed power
- Quality graphics capable - 45kpps @ 8° ILDA scanners - upgradable to 60kpps
- Extremely sharp intense beams - low divergence of <0.6 mrad
- Full colour mixing
- Integrated powerful mainboard with advanced configuration features (geo-correction, zone setup, colour balancing, etc.) and DAC feature
- Integrated network switch for linking the control signal
- Control screen for convenient mode selection
- Rugged tour grade compact housing
- Laser Artists' choice
- Lighting Designers' choice
- incl. waterproof flightcase
Integrated ShowNET incl. free laser show software
The tarm 6 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 6 for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. Custom frames and shows can be played back from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 6 for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. Custom frames and shows can be played back from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
- DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
- Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
Specifications
- Guaranteed Power at aperture: 6'000 mW
- Power Red: 2'000 mW / 637 nm
- Power Green: 2'000 mW / 520 nm
- Power Blue: 2'500 mW / 450 nm
- Beam Specifications: ca. 4.5 mm / <0.6 mradScanner45kpps @ 8° ILDA; optional CT-6210 with LAS Turboscan: 60kpps@8° ILDA, max. 60°
- Max. Scan Angle: 50°
- Laser Source: Diode
- Laser Class: 4
- Operation Modes: ILDA, DMX, LAN, ArtNet, integrated SD card, stand-alone, master-slave; integrated intelligent ShowNET laser mainboard with display
- Basic Patterns: Over 120 (layers, tunnels, fences, waves, etc.)
- Accessories: Incl. waterproof flightcase, raincover power cable, manual, key, interlock connector, full version Showeditor software license included
- Power Supply: 85 V - 250 V / AC
- Power Consumption: 230 W
- Dimensions: 320/260/140 mm
- Weight: 13 kg
Overview Video
Additional Information
SKU
8733
Lighting Effect Type
Show Laser Projector
Power
6'000 mW
Colours
RGB
DMX Control
Yes
Remote Control
N/A
Warranty
Full Manufacturer's Warranty