RCF DMA 82

The RCF DMA 82 is a two-channel matrix amplifier, utilising a powerful DSP platform for managing inputs and outputs in terms of routing and equalization; moreover, dedicated pre-sets for RCF speakers have been included to optimize their acoustic performance.

It can distribute 4 audio channels to DMA 162P units through an analogue audio BUS, combining a flexible and scalable multi-room architecture with an easy connection and installation. Its configuration is simple and user friendly and can be carried out through either its front panel controls (with OLED display) or RDNet.

Thanks to its installation flexibility, accurate design, and robustness, it is ideal for a wide range of business music and installed sound applications.

• 2 x 80 W Class-D power amplifier
• 20 ÷ 20000 Hz frequency range
• Full on-board processing
• RCF speakers’ pre-sets
• Proprietary bass enhancer algorithm
• FiRPHASE linear phase filters
• Flexible and scalable multi-room architecture
• Suitable for desktop or rack installation
• RDNet ready for networked management
• Remote controls and paging console accessories

Class-D amplifiers equipped with a powerful DSP platform, allowing managing inputs and outputs in terms of routing and equalization. A complete set of processing functions is available, including speaker pre-sets, proprietary bass enhancer algorithm, FIR filters, and environmental equalization. Thanks to its extremely compact size, accurate design, and robustness, it is ideal for a wide range of applications.

To fit with any installation need, DMA amplifiers have been designed with a highly scalable architecture and each device can distribute 4 audio channels to satellite units. This allows increasing installed power and creating a multi-room architecture. The connection can be done with just 1 CAT5e cable. Each satellite unit can be differently set using the DIP-SWITCH on the rear panel to receive the desired channels.

Equipped with a powerful DSP platform, DMA units integrate RCF proprietary technologies such as FiRPHASE, a FiR filtering technology, and BASS ENHANCER, a sophisticated algorithm that increases low frequencies perception without affecting the output power.

Pre-loaded presets, to optimize the performance and equalization of any RCF speaker and to have the right RCF signature sound.

RCF Business Music products are ready to use in few steps, even faster when connected to the RDNet networked management.

• Amplifier Specifications
  • Output Power: 2 X 80 W ​@ 4 OHM OR 160 W hi-Z
  • Frequency Response: 20Hz-20000Hz
• Inputs
  • 2x Line Stereo (RCA) (1 alternative to AUX IN on the front panel)
  • 1x Mic/Line Balanced (removable terminal)
  • 1x Paging (RJ 45)
• Outputs (signal)
  • 1x Stereo Line/Sub (RCA)
  • 1x 4-Channels Audio Bus (RJ 45)
• Controls
  • 1x Remote Mute Contact
  • 2x Wall Mount Remote Controls
  • 1x CTRL + Firmware Update USB Port
• Power Requirement
  • Operating Voltage: 90-240V~5-/60Hz
  • Power Consumption (MAX): 200W
• Physical Specifications
  • Colour: Black
  • Material: Metal
  • Rack Mounting: 1/2 19", 1U (optional rack mounting accessory required
  • Dimensions: 314 x 213 x 44mm
  • Weight: 1.7kg